Neodymium Magnet With Countersunk Hole 1.Dimensions: Customized / As Required 2.Materials: Nd-Fe-B N35,N38,N40,N42,N42,N50,N52,N55 (Grade of NdFeB Magnet) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Axial Magnetized 5.Max operating temp.: 80-220 degrees celsius They are widely used for door,cabinet and other applications,which can be fixed on some place with screw and then to holding something. We can also provide you with package and accessories suitable for retail.
Disc Neodymium Magnet With Countersunk Hole 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Axial magnetized 5.Max operating temp.: 80 to 220 degrees celsius These countersunk neodymium magnet can be used for a wide range of applications including door closures,tool hangers,and etc. The hole can be drilled according to screws applicable to M3,M4,M5,M6,M8 or custom hole sizes,so the magnets to be conveniently fixed in place.
Block Neodymium Magnet With Countersunk Hole 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Thickness magnetized 5.Max operating temp.: 80 to 220 degrees celsius These countersunk neodymium magnet can be used for a wide range of applications including door closures,tool hangers,and etc. The hole can be drilled according to screws applicable to M3,M4,M5,M6,M8 or custom hole sizes,so the magnets to be conveniently fixed in place.
Disc Neodymium Magnet With Countersunk Hole 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Axial magnetized 5.Max operating temp.: 80 to 220 degrees celsius These countersunk neodymium magnet can be used for a wide range of applications including door closures,tool hangers,and etc. The hole can be drilled according to screws applicable to M3,M4,M5,M6,M8 or custom hole sizes,so the magnets to be conveniently fixed in place.
Arc Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Block Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius It can be very small block/cube,or it can be big block/bar and become a very powerful magnet.They are often used for industrial applications.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. Insulation layers: 2-40 layers. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature is 60-250 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Neodymium magnetic wheel/gear 1.Dimensions: Dia from 25mm to 160mm 2.Materials: NdFeB and Steel 3.Magnetization direction: Axial magnetized 4.Max operating temp.: 100 degrees celsius
