Features: 1. Using high-performance permanent magnetic materials, with strong magnetic force, unique circuit design, remanence almost zero.
2. High safety factor, maximal magnetic force is 3.5 times of rated lifting capacity.
3. Handle switches with safety button, easy for Single- hand operation more safety and convenience.
4. "V" style design at the bottom of lifter, can lift round steel and steel plate.
5.Without electricity, magnetic force permanent, more safety in using, and can be operated in the field.
As the core model of high energy counterbore pot magnet, the Counterbore NdFeB Pot Magnet adopts a high-purity NdFeB magnetic core with a precise counterbore design, featuring strong adsorption and easy installation. It combining durability and aesthetics, making it the preferred custom NdFeB pot magnet for industrial, hardware, electronic and other scenarios.
Arc Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Block Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius It can be very small block/cube,or it can be big block/bar and become a very powerful magnet.They are often used for industrial applications.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. Insulation layers: 2-40 layers. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature is 60-250 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Manual lifting magnets 1.Lifting Capacity Range From 100kgs from 3000kgs 2.Automatic Permanent Magnetic Lifter for optional 3.Different color as customized
Office Magnet With Steel Cup 1.Dimensions: Dia 20, 30 mm 2.Materials: NdFeB Magnet + Plastic Cup 3.Coating: Nickel 4.Magnetization direction: Axial magnetized 5.Magnetic force : Hold 10 to 15 pieces of A4 paper on white board
Our magnets are widely applied to motors and generators such as Servo motors,Linear motors,Automotive drive motors,Wind power generators, Home theater,Instrumentation,Medical equipment,Wind turbines and Magnetic tools,Automotive sensors, Compressor motors,Audio equipment etc.
Radial Oriented Sintered Neodymium Ring Magnet 1.Dimensions: Read the details 2.Materials: NdFeB,Grade N35 to N48, 35M to 45M, 35H to 42H, 35SH to 40SH, 35UH to 38UH,35EH 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Radial magnetized 5.Max operating temp.: 80 to 220 degrees celsius This type of neodymium ring magnets widely use for robotics and industrial automatic production line etc.
Countersunk Fishing Magnets 1. Popular Diameter: 67mm 75mm 97mm 107mm 135mm With different thickness 2. Super strong neodymium magnet+A3 steei+eyelets M10 or M12 3. Maximum pulling force up to 1200kgs 4. Ni+ Cu+ Ni coating or Zinc coating 5. Single-sided type 6. Lasing logo,printed company brand,cardboard box or plastic case as customized.
Round Neodymium Magnet 1.Dimensions: Customized / As Required 2.Materials: Nd-Fe-B N35,N38,N40,N42,N42,N50,N52,N55 (Grade of NdFeB Magnet) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width or length 5.Max operating temp.: 80-220 degrees celsius Round NdFeB magnet have a wide range of applications. Even at a very small size,it is strong enough for many tasks.
Single Switch Welding Magnet On/Off Switch Magnetic Clamp 1. Dimensions : L 111 x W 95 x T 28 mm 2. Angles : 45 degree and 90 degree 3. Pull off force : 30 KG 4. MOQ for custom logo is 500 sets 5. With one on/off switch to control the magnetic force. 6. Suitable for welding the inside square corner of various magnetic material
