– Power generator, wind turbine
– Hold metal pieces for machining
– Separation of ferrous materials
– Cases when magnetic field is required across a huge gap
– Science projects or experiment
– Magnetic art/sculptures
– Magic Routine
– Simply to hold and behold the awesomeness of such great power
Precautions
This magnet is not a toy, it will cause serious damage and injury if proper attention and care are not observed.
This magnet may cause damage/disturbance to some equipment that contains magnetic or ferrous material including but not limited to: watches, smartphones, speakers, earphones, compasses, pacemakers, electronic devices, storage mediums, credit cards, etc.
Do not pass this magnet to anyone who has not read and fully understood the nature, risks, and dangers of neodymium magnets.
Be extra careful of ferrous metal objects that may suddenly jump towards the magnet or vice versa.
Always store this magnet in a safe and stable place away from reach of children or pet.
To ensure you get the most accurate quote, please give us the following details:
1. Grade requirements
2. Magnetization direction
3. Working temperature
4. Quantity requirements
5. Whether coating is required
6. Size requirements
Arc Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Block Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius It can be very small block/cube,or it can be big block/bar and become a very powerful magnet.They are often used for industrial applications.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. Insulation layers: 2-40 layers. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature is 60-250 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Neodymium magnetic wheel/gear 1.Dimensions: Dia from 25mm to 160mm 2.Materials: NdFeB and Steel 3.Magnetization direction: Axial magnetized 4.Max operating temp.: 100 degrees celsius
Custom Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius If you application requires a special shaped magnet,we would like to provide the best support and produce it according to your drawing.
1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius If you application requires a special shaped magnet,we would like to provide the best support and produce it according to your drawing.
Size customized Coating Nickle coated ; (Ni/Zn/Epoxy black can choose) Test Salt spray test Material NdFeB Certification ISO9001/TS16949/Reach/Rosh Working temperature 60-220 Degree Centigrade
Size customized Coating Nickle coated ; (Ni/Zn/Epoxy black can choose) Test Salt spray test Material NdFeB Certification ISO9001/TS16949/Reach/Rosh Working temperature 60-220 Degree Centigrade
Size D18*2mm/custom Coating Nickle coated ; (Ni/Zn/Epoxy black can choose) Test Salt spray test 24h Material brass/iron/zinc alloy Certification ISO9001/TS16949/Reach/Rosh Working temperature 60 Degree Centigrade
Arc Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Hard Anisotropic Ferrite Magnet Ceramic magnets (also known as "ferrite" magnets) are part of the permanent magnet family and are currently the lowest cost hard magnets. The ceramic (ferrite) magnet composed of strontium carbonate and iron oxide has medium strength and can be used at quite high temperature.
