Magnetic Tool Holder 1.Stadard model:12"/ 18" /24" 2.Material: NdFeb magnet+A3 steel+abs 3.Packing: Carton box or Blister Packing or 3pcs as a set 4.Customized packing
Hard Anisotropic Ferrite Magnet 1.Dimensions: According to your requirements 2.Grade: Y30,Y30BH,Y30BH-1,Y35 and etc 3.Magnetized: Diametrical,Width,Thickness,as optional 4.Size:max out dia. 280mm,max thickness 40mm 5.Tolerance:OD and ID 2%,+/-0.1mm for thickness
Motor Magnet SmCo Magnet 1.Dimensions: According to your requirements 2.Grade: YXG26 28 30,YXG26H 28H 30H and etc. 3.Max Operating Temperature: 250 ~350 degree celsius 4.Material:SmCo5,Sm2Co17 5.Magnetized: Length,Width,Thickness and Muti-Poles 6.Advantage:High working temperature,Extremely resistant to demagnetization,Resistant to corrosion
Custom Samarium Cobalt Magnets 1.Dimensions: According to your requirements 2.Grade: YXG26 28 30,YXG26H 28H 30H and etc. 3.Max Operating Temperature: 250 ~350 degree celsius 4.Material:SmCo5,Sm2Co17 5.Magnetized: Axial,Diametrial,Width and etc 6.Advantage:High working temperature,Extremely resistant to demagnetization,Resistant to corrosion
Sphere/Ball Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Epoxy and etc. 4.Magnetization direction: Diametrical magnetized 5.Max operating temp.: 80 to 220 degrees celsius High grade of sphere NdFeB magnet usually use for the industrial application.
Custom Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius If you application requires a special shaped magnet,we would like to provide the best support and produce it according to your drawing.
Arc Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Block Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius It can be very small block/cube,or it can be big block/bar and become a very powerful magnet.They are often used for industrial applications.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. Insulation layers: 2-40 layers. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature is 60-250 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.