Arc Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Block Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 to 220 degrees celsius It can be very small block/cube,or it can be big block/bar and become a very powerful magnet.They are often used for industrial applications.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. Insulation layers: 2-40 layers. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature is 60-250 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Disc/Round Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Axial magnetized,Diametrical magnetized and etc. 5.Max operating temp.: 80 to 220 degrees celsius Round NdFeB magnet have a wide range of applications. Even at a very small size,it is strong enough for many tasks. Tiny size like D3x1mm,D4x2mm magnet and etc. Middle size like D6x2mm,D10x1mm manget and etc. Big size like D50x30mm magnet and etc.
N52 Neodymium Block Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N52 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Through thickness,width,or length 5.Max operating temp.: 80 degrees celsius It can be very small block/cube,or it can be big block/bar and become a very powerful magnet, It depends on your application.
Size D18*2mm/custom Coating Nickle coated ; (Ni/Zn/Epoxy black can choose) Test Salt spray test 24h Material brass/iron/zinc alloy Certification ISO9001/TS16949/Reach/Rosh Working temperature 60 Degree Centigrade
Multi Pole Ring Magnet 1.Dimensions: According to your requirements 2.Grade: BN-4,BN-6,BN-10 and etc 3.Max Operating Temperature: 120-160 degree celsius 4.Coating: Epoxy,Parylene 5.Magnetized: Axial,Diametrical or Multi-Poles 6.Advantage: Extreme resistance to demagnetization and complex shapes possible.
Office Magnet With Steel Cup 1.Dimensions: Dia 20, 30 mm 2.Materials: NdFeB Magnet + Plastic Cup 3.Coating: Nickel 4.Magnetization direction: Axial magnetized 5.Magnetic force : Hold 10 to 15 pieces of A4 paper on white board
Disc/Round Neodymium Magnet 1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Axial magnetized,Diametrical magnetized and etc. 5.Max operating temp.: 80 to 220 degrees celsius Round NdFeB magnet have a wide range of applications. Even at a very small size,it is strong enough for many tasks. Tiny size like D3x1mm,D4x2mm magnet and etc. Middle size like D6x2mm,D10x1mm manget and etc. Big size like D50x30mm magnet and etc.
Dual-Use Welding Magnet 1.Style: our welding magnet have many different styles can meet your needs. Contact the customer service personnel to obtain the catalogue of welders; 2.Model: usually has S / M / L, please consult service personnel for special size; 3.Customization: We support the customization of welders, such as stickers, cardboard, outer packaging, etc; 4.Quantity: we can accept the one sample of welder (the freight shall be charged by the buyer); There are no quantity requirements for batch orders, which can be based on customer requirements.
Multi Pole Ring Magnet 1.Dimensions: According to your requirements 2.Grade: BN-4,BN-6,BN-10 and etc 3.Max Operating Temperature: 120-160 degree celsius 4.Coating: Epoxy,Parylene 5.Magnetized: Axial,Diametrical or Multi-Poles 6.Advantage: Extreme resistance to demagnetization and complex shapes possible.
