1.Dimensions: Customized / Produce according to your needs 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Nickel,Zinc,Epoxy and etc. 4.Magnetization direction: Axial magnetized,Diametrical magnetized and etc. 5.Max operating temp.: 80 to 220 degrees celsius Round NdFeB magnet have a wide range of applications. Even at a very small size,it is strong enough for many tasks. Tiny size like D3x1mm,D4x2mm magnet and etc. Middle size like D6x2mm,D10x1mm manget and etc. Big size like D50x30mm magnet and etc.
Hard Anisotropic Ferrite Magnet Ceramic magnets (also known as "ferrite" magnets) are part of the permanent magnet family and are currently the lowest cost hard magnets. The ceramic (ferrite) magnet composed of strontium carbonate and iron oxide has medium strength and can be used at quite high temperature.
Block Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners), -magnetic separators
Ring Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners) -magnetic separators
Hard Anisotropic Ferrite Magnet Ceramic magnets (also known as "ferrite" magnets) are part of the permanent magnet family and are currently the lowest cost hard magnets. The ceramic (ferrite) magnet composed of strontium carbonate and iron oxide has medium strength and can be used at quite high temperature.
1. Popular Diameter: 67mm 75mm 97mm 107mm 135mm With different thickness 2. Super strong neodymium magnet+A3 steei+eyelets M10 or M12 3. Maximum pulling force up to 1200kgs 4. Ni+ Cu+ Ni coating or Zinc coating 5. Single-sided type 6. Lasing logo,printed company brand,cardboard box or plastic case as customized.
Hard Anisotropic Ferrite Magnet Ceramic magnets (also known as "ferrite" magnets) are part of the permanent magnet family and are currently the lowest cost hard magnets. The ceramic (ferrite) magnet composed of strontium carbonate and iron oxide has medium strength and can be used at quite high temperature.
Plastic Magnetic Push Pin 1.Dimensions: Dia 12, 19, 29 mm 2.Materials: NdFeB Magnet + Plastic 3.Coating: Nickel 4.Magnetization direction: Axial magnetized 5.Magnetic force : Hold 18 to 30 pieces of A4 paper on white board
Rectangular Neodymium Magnet Neodymium magnet (NdFeB), commonly known as "rare earth" magnet, is a high-performance permanent magnet made of neodymium, iron and boron alloys. They are real permanent magnets and will not lose their magnetism unless heated to a temperature exceeding the maximum operating temperature rating or their protective coating is damaged. Characteristic: -Energy products may exceed 50mgoe -Low corrosion resistance Applications: -automotive -electronics (sensors, speakers, scanners) -medical (scanners), -magnetic separators
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Laminated Magnet 1. Insulation layer thickness within 0.04mm. 2. At normal temperature, the bonding strength of the insulation layer can reach more than 50Mpa. 3. The maximum operating temperature can reach 200 ℃. 4. Tolerance is within 0.05mm. 5. Each magnets are insulated from each other.
Neodymium magnetic wheel/gear 1.Dimensions: Dia from 25mm to 160mm 2.Materials: NdFeB and Steel 3.Magnetization direction: Axial magnetized 4.Max operating temp.: 100 degrees celsius
Neodymium magnetic wheel/gear 1.Dimensions: Dia from 25mm to 160mm 2.Materials: NdFeB and Steel 3.Magnetization direction: Axial magnetized 4.Max operating temp.: 100 degrees celsius
Neodymium Magnet (NdFeB), Commonly Known As "Rare Earth" Magnet, Is A High-Performance Permanent Magnet Made Of Neodymium, Iron And Boron Alloys. They Are Real Permanent Magnets And Will Not Lose Their Magnetism Unless Heated To A Temperature Exceeding The Maximum Operating Temperature Rating Or Their Protective Coating Is Damaged. Characteristic: -Energy Products May Exceed 50mgoe -Low Corrosion Resistance Applications: -Automotive -Electronics (Sensors, Speakers, Scanners) -Medical (Scanners) -Magnetic Separators
Multi Pole Injection Ferrite Magnet 1.Material: PA6 Base resin+Ferrite Magnetic Powder 2.Dimensions: According to your requirements 3.Grade: MF-618,MF-620 and etc 4.Max Operating Temperature: -20°C to +15O°C 5.Magnetized: Axial,Diametrical or Multi-Poles 6.Advantage: High dimensional accuracy, good consistency, no follow-up processing, stable performance, shock resistance
Magnetic Welding Ground Clamp 1.Style: our welding magnet have many different styles can meet your needs. Contact the customer service personnel to obtain the catalog of welders; 2.Model: usually has KWGC1-200 / KWGC1-300 / KWGC1-600, please consult service personnel for special size; 3.Customization: We support the customization of welders, such as stickers, cardboard, outer packaging, etc; 4.Quantity: we can accept the one sample of welder (the freight shall be charged by the buyer); There are no quantity requirements for batch orders, which can be based on customer requirements.
Screwed Bush NdFeB Pot Magnet 1.Dimensions: Dia from 10mm to 120mm 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Zinc,Nickel,Epoxy or Color paint. 4.Magnetization direction: Axial magnetized 5.Max operating temp.: 80 to 220 degrees celsius They widely use for trade fair,any shop build ,at home or other purpose.No matter use in private household or commercial or hobby applications are all suitable.
Countersunk NdFeB Pot Magnet 1.Dimensions: Dia from 12mm to 120mm 2.Materials: NdFeB,Grade N35 to N52 (M,H,SH,UH,EH AH) 3.Plating/Coating: Zinc,Nickel,Epoxy or Color paint. 4.Magnetization direction: Axial magnetized 5.Max operating temp.: 80 to 220 degrees celsius They are ideal for using in fixing applications such as doors,panels,marketing displays,light fixtures and fittings.